제작사례 - 드림에어(주)

This is a staging environment

MODEL division			DCTH-A020SU	DCTH-A030SU	DCTH-A050SU	DCTH-A060DU	DCTH-A075SU	DCTH-A100DU	DCTH-A150DU	DCTH-A200DU
Power Supply			3PH, 220/380/440V, 50/60Hz
Refrigerant used			R-22
Cooling capacity (Kcal/h)			5,400	8,100	13,500	16,200	20,250	27,000	40,500	54,000
Heating capacity (Kcal/h)			5,160	6,880	8,600	10,320	12,040	17,640	20,640	24,080
Compressor (Nominal output kW)			1.5	2.24	3.73	2.24×2EA	5.6	3.73×2EA	5.6×2EA	7.5×2EA
BLOWER	Output (kW·P·EA)		0.2kW×6P	0.45kW×6P	0.5kW×8P	0.45kW×6P×2EA	0.45kW×6P×2EA	0.5kW×8P×2EA	0.55kW×8P×2EA	0.55kW×8P×2EA
	cabin static pressure (mm/Aq)		15 ~ 20
	Airflow (Cmm)		25	35	60	80	80	110	160	220
heater	form		Aero fimmes tube
heater	Capacity (kW·step)		6kW (3×2)	8kW (4×2)	10kW (2.5×4)	12kW (3×4)	14kW (3.5×4)	16kW (4×4)	24kW (6×4)	28kW (7×4)
FILTER			PRE FILTER (non-woven fabric)
humidifier	form		Pan Type / Electrode Rod Type
humidifier	Humidification capacity (kg/h)		3	4	5	6	7	8	10	12
internal parts			MICOM CONTROLLER, Solenoid Valve, Expansion Valve, SIGHT GLASS, FILTER DRIER, EHC.
PIPING SIZE	REF.	GASS	19.05	19.05	22.22	19.05×2EA	22.22	22.22×2EA	22.22×2EA	28.58×2EA
	REF.	LIQUID	9.52	9.52	12.7	9.525×2EA	15.88	12.7×2EA	15.88×2EA	15.88×2EA
	DRAIN		25A	25A	25A	25A	25A	32A	32A	32A
	HUMIDIFIER		9.52	9.52	9.52	9.52	9.52	9.52	9.52	9.52
	WATER PIPING		9.52	9.52	9.52	9.52	9.52	9.52	9.52	9.52
UNIT SIZE	WIDTH	mm	770	770	850	1,150	1,150	1,400	1,800	1,800
	DEPTH	mm	610	610	610	650	650	700	800	800
	HEIGHT	mm	1,830	1,830	1,830	1,830	1,830	1,830	1,900	1,900

division MODEL			DCTH-A020SD	DCTH-A030SD	DCTH-A050SD	DCTH-A060DD	DCTH-A075SD	DCTH-A100DD	DCTH-A150DD	DCTH-A200DD
Power Supply			3PH, 220/380/440V, 50/60Hz
Refrigerant used			R-22
Cooling capacity (Kcal/h)			5,400	8,100	13,500	16,200	20,250	27,000	40,500	54,000
Heating capacity (Kcal/h)			5,160	6,880	8,600	10,320	12,040	17,640	20,640	24,080
Compressor (Nominal output kW)			1.5	2.24	3.73	2.24×2EA	5.6	3.73×2EA	5.6×2EA	7.5×2EA
BLOWER	Output (kW·P·EA)		0.2kW×6P	0.45kW×6P	0.5kW×6P	0.75kW×6P	0.75kW×6P	0.5kW×6P×2EA	0.75kW×6P×2EA	2.2kW×6P×2EA
	cabin static pressure (mm/Aq)		15 ~ 20
	Airflow (Cmm)		35	35	60	70	80	120	160	220
heater	form		Aero fimmes tube
heater	Capacity (kW·step)		6kW (3×2)	8kW (4×2)	10kW (2.5×4)	12kW (3×4)	14kW (3.5×4)	16kW (4×4)	24kW (6×4)	28kW (7×4)
FILTER			PRE FILTER (non-woven fabric)
humidifier	form		Pan Type / Electrode Rod Type
humidifier	Humidification capacity (kg/h)		3	4	5	6	7	8	10	12
internal parts			MICOM CONTROLLER, Solenoid Valve, Expansion Valve, SIGHT GLASS, FILTER DRIER, EHC.
PIPING SIZE	REF.	GASS	19.05	19.05	22.22	19.05×2EA	22.22	22.22×2EA	22.22×2EA	28.58×2EA
	REF.	LIQUID	9.52	9.52	12.7	9.525×2EA	15.88	12.7×2EA	15.88×2EA	15.88×2EA
	DRAIN		25A	25A	25A	25A	25A	32A	32A	32A
	HUMIDIFIER		9.52	9.52	9.52	9.52	9.52	9.52	9.52	9.52
	WATER PIPING		9.52	9.52	9.52	9.52	9.52	9.52	9.52	9.52
UNIT SIZE	WIDTH	mm	800	800	870	1,150	1,250	1,450	1,900	1,900
	DEPTH	mm	650	650	650	700	700	700	800	800
	HEIGHT	mm	1,750	1,750	1,780	1,800	1,800	1,800	1,850	1,850

division MODEL			DC-030	DC-050	DC-075	DC-100
Power Supply		epicycle	3PH, 220/380V, 60Hz
Power Supply		Control power	1PH, 220V, 60Hz
Refrigerant used			R-22
compressor			Closed-type scroll compressor
condenser	Heat exchanger type		FIN & TUBE
	air blower	FAN (φ)	450	550	630	700
		MOTOR	0.2kW×6P×1EA	0.4kW×6P×1EA	0.4kW×6P×1EA	0.75kW×8P×1EA
		Air Volume	60	100	140	200
Control and protection devices			Pressure switch (high pressure, low pressure)
Other internal parts			Receiver, filter dryer, solenoid valve, sight glass
Refrigerant piping (Ø)		gas inlet	15.88	22.22	28.58	28.58
Refrigerant piping (Ø)		Liquid outlet	9.52	12.7	15.88	15.88
External dimensions		“"you"”		1103×858×894	1303×898×1046	1454×1014×1148
External dimensions		“"radish"”	858×712×742	738×858×894	868×898×1046	894×1014×1148
Anchor dimensions		“"you"”		995×750	1195×790	1340×900
Anchor dimensions		“"radish"”	750×610	630×750	760×790	780×900
Weight (kg)		“"you"”		155	195	250
Weight (kg)		“"radish"”	108	136	160	210

Classification / MODEL	PA-030	PA-050	PA-075	PA-100	PA-150	PA-200	PA-250	PA-300
Nominal Output (HP / kW)	3 / 2.2	5 / 3.7	7 / 5.5	10 / 7.5	15 / 11	20 / 15	25 / 18.5	30 / 22
epicycle	3PH, 220/380V, 60Hz
Control power	1PH, 220V, 60Hz
Refrigerant used	R-22
Condenser heat exchanger type	FIN & TUBE
Blower FAN (Ø)	400×2	400×2	500×2	500×2	600×2	700×2	650×3	700×3
Blower output (kW×P)	0.1×6P	0.1×6P	0.2×6P	0.2×6P	0.4×6P	0.75×6P	0.75×6P	0.75×6P
Blower airflow (CMM)	80	80	140	160	280	400	480	570
Streamer capacity (kW, original unit)	3.9	7.5	9.1	13.3	25.5	39.3	45.8	45.8
Available	Ø4.5 (73℃)
Condensation pressure control	High pressure switch
protection device	High/low pressure switch, compressor overheat protector
Other internal parts	Filter dryer, liquid level gauge, vibration absorption tube, manual liquid line valve, oil separator, liquid separator, pressure gauge (high pressure, low pressure, hydraulic pressure), solenoid valve
Connecting pipe gas inlet (Ø)	22.22	28.58	34.92	41.28	22.22	41.28	56.96	53.98
Connecting pipe liquid outlet (Ø)	9.252	12.70	15.88	9.5525	22.22	22.22	22.22	22.22
External dimensions L	1230	1230	1310	1310	1660	1860	2450	2880
External dimensions W	690	690	790	790	840	935	935	935
External dimension H	1290	1290	1390	1390	1690	1740	1790	1790
Yangkachisu	840×690	840×690	900×780	900×780	1230×840	1450×935	2020×935	2220×935
Weight (kg)	About 250	Approximately 280	Approximately 390	Approximately 420	Approximately 530	Approximately 620	Approximately 790	Approximately 860

Classification / MODEL	DCPW-030	DCPW-050	DCPW-075	DCPW-100	DCPW-150	DCPW-200	DCPW-250	DCPW-300	DCPW-400
Power Supply	3PH, 220/380/440V, 60Hz
Refrigerant used	R-22
Compressor type	HERMETIC (SCROLL)
Compressor Model	ZR36K	ZR61K	ZR81K	ZR125K	ZR160K	ZR190K	ZR250K	ZR310K	ZR190K-2
Compressor HP	3	5	7.5	10	15	20	25	30	40
Condenser heat exchanger type	FIN & TUBE
Condenser TA (㎡)	29.25	49.2	73.8	95.4	136.4	170.9	219.4	254.4	339.2
Blower FAN (Ø)	450×2EA	450×2EA	500×2EA	550×2EA	600×2EA	700×2EA	650×3EA	700×3EA	750×3EA
Blower MOTOR	0.2kW×6P	0.2kW×6P	0.2kW×6P	0.4kW×6P	0.4kW×6P	0.75kW×6P	0.75kW×6P	0.75kW×6P	0.75kW×6P
Air flow (CMM)	110	110	160	220	330	400	550	600	800
Evaporator heat exchanger type	SHELL & TUBE
Cold water inlet/outlet temperature	WATER IN 12℃ / WATER OUT 7℃
Energy (kcal/h)	8,550	14,700	2,950	29,400	44,100	51,000	63,750	88,200	116,400
Control and protection devices	High and low pressure switches, fan control switches
internal parts	Receiver, filter dryer, liquid level gauge, solenoid valve, gauge, strainer
WATER IN (A)	32	32	40	40	50	50	65	65	80
WATER OUT (A)	32	32	32	40	50	50	65	65	80
Gas Inlet (INLET)	7/8″	7/8″	1-1/8″	1-3/8″	1-5/8″	2-1/8″	2-1/8″	2-1/8″	2-1/8″
Liquid outlet (OUTLET)	3/8″	1/2″	5/8″	5/8″	7/8″	7/8″	7/8″	7/8″	1-1/8″
HEIGHT (mm)	1270	1500	1500	1620	1775	1845	1795	1875	1875
WIDTH (mm)	1230	1290	1290	1530	1710	1960	2580	2780	2780
DEPTH (mm)	610	610	800	840	840	940	840	940	1030
Yangkachisu	840×690	985×555	1045×745	1210×785	1395×785	1655×785	2260×785	2495×885	2460×975

Classification / MODEL	DR-A1	DR-A2	DR-A3	DR-A4	DR-A5
Treatment air volume (m³/h)	180	300	400	500	600
ROTOR	Built-in honeycomb-type dehumidification rotor
Power consumption (kW)	0.9	1.8	3.3	4	4.8
Power specifications	1PH, 220V / 3PH, 220V, 60Hz

Classification / MODEL	DR-C1	DR-C2	DR-C3	DR-C4	DR-C5	DR-C6
Treatment air volume (m³/h)	300	400	600	800	1000	1500
Regeneration airflow (m³/h)	100	130	200	260	330	500
Regenerative heater (kW)	3	3.8	6	9	12	18
Processing FAN (kW)	0.4	0.75	1.1	1.5	1.5	2.2
Regeneration FAN (kW)	0.2	0.4	0.75	0.75	0.75	0.75
Power specifications	3PH, 380V, 60Hz
External dimensions (L×W×H)	800×1700×1680	800×1700×1680	900×1800×1880	900×1800×1880	1200×2000×2100	1200×2000×2100
Weight (kg)	260	320	380	560	680	830

Classification / MODEL	LDR-B1	LDR-B2	LDR-B3	LDR-B4	LDR-B5	LDR-B6	LDR-B7	LDR-B8	LDR-B9	LDR-B10	LDR-B11
Treatment air volume (m³/h)	2500	3500	4500	6500	8000	10000	12000	14000	16000	18000	20000
Regeneration airflow (m³/h)	450	620	780	1100	1400	1700	2100	2700	3300	3900	4500
Processing FAN (kW)	0.75	1.5	1.5	2.2	2.2	3.7	3.7	5.5	5.5	5.5	5.5
Regenerative heater (kW)	18	27	36	48	60	72	84	96	108	120	132
Regeneration FAN (kW)	0.75	1.1	1.1	1.1	3	3	3	4	5	6	7
Power specifications	3PH, 380V, 60Hz

Classification / MODEL	LDRP-1A-1	LDRP-1A-2	LDRP-1A-3	LDRP-1A-4	LDRP-1A-5	LDRP-1A-6	LDRP-1A-7	LDRP-1A-8
Treatment air volume (m³/h)	2500	5500	4500	6000	8000	10000	12000	15000
Regeneration airflow (m³/h)	450	620	780	1100	1400	1700	2100	2700
Processing FAN (kW)	0.75	1.5	1.5	2.2	2.2	3.7	3.7	5.5
Regenerative heater (kW)	18	27	36	48	60	72	84	96
Regeneration FAN (kW)	0.75	1.1	1.1	1.1	3	3	3	4
Power specifications	3PH, 380V, 60Hz

division	DRD-2	DRD-3	DRD-5	DRD-8	DRD-10	DRD-15	DRD-20
Compressor HP	2	3	5	7.5	10	15	20
Compressor HP × Logarithm	2 × 1	3 × 1	5 × 1	7.5 × 1	10 × 1 (5 × 2)	15 × 1 (7.5 × 2)	10 × 2
Cooling capacity (kcal/h)	5,000	7,500	12,500	18,700	25,000	37,500	50,000
Dehumidification capacity (kg/hr)	2.8	4.2	7	10.5	14	21	28
refrigerant	R-22
condenser	Air-cooled (Plate fin coil) / Water-cooled (Shell and tube)
evaporator	Slit & Louver Fin
Reheater	Steam, electric heater
Heat exchanger (m²)	0.03	0.045	0.075	0.12	0.15 × 1 (0.075 × 2)	0.24 × 1 (0.12 × 2)	0.15 × 2
Expansion valve	Thermak expansion valve
Blower airflow (m³/min)	20	30	50	75	100	150	200
Blower HP	1/2	1	2	3	3	5	7.5
Water pipe · Cooling water inlet	3/4	1	1	1	1	2	2
Water piping · Cooling water outlet	3/4	1	1	1	1	2	2
Water pipes · Drain pipes	1/2	3/4	3/4	3/4	1	1	1
Refrigerant piping · Suction pipe	1/2	1/2	3/4	7/8	3/4 × 2	7/8 × 2	1 1/8 × 2
Refrigerant piping · Liquid line	3/8	3/8	1/2	5/8	1/2 × 2	5/8 × 2	5/8 × 2
External dimension W (mm)	1200	1200	1300	1300	1450	1800	2200
External dimension D (mm)	700	700	750	800	800	850	900
External dimension H (mm)	1800	1800	1800	1800	1950	2100	2200
Optimal area	25℃·40%: 1HP per 2 pyeong / 25℃·50%: 1HP per 3 pyeong

Classification / MODEL	DR-AHU-010	DR-AHU-015	DR-AHU-020	DR-AHU-025	DR-AHU-030	DR-AHU-040	DR-AHU-050	DR-AHU-060
A	3400	3800	3800	4200	4200	4200	4500	4500
B	1500	2000	2000	2200	2200	2500	2700	2700
C	1600	1800	1800	2000	2000	2100	2200	2200
D	1100	1100	1100	1200	1200	1200	1200	1200
E	800	900	900	1000	1000	1000	1000	1000
F	1500	1800	1800	2000	2000	2000	2300	2300
G × H	500×1000	500×1500	500×1500	600×2000	600×2000	600×2000	600×2300	600×2300
J × J′	560×495	660×573	780×660	780×660	880×742	880×742	980×825	1080×903
K	600	600	600	600	700	700	700	700

Components	specification
Casing & Insulation	1.6THK, specified color paint
Pre-Filter	Pre: AFI 85%
Medium Filter	Medium: NBS 90%
Cooling Coil	DX-Type Evaporator, R-22
Heating Coil	Steam, Hot Water, Electric Type
Humidifier	Electromagnetic rod type
Drain Pan	SUS
Supply Fan	Sirocco & Air Foil Fan
Motor	Insu. Class “B”
Isolator	Def. 25mm or 50mm Spring
Control Box	AHU Controller
Insulation	Artilon, Master Foam, G.Wool, Urethane Form

Classification / MODEL	DRHP-100	DRHP-150	DRHP-200	DRHP-250	DRHP-300	DRHP-400	DRHP-500	DRHP-600
Standard airflow (CMM)	80	120	160	200	240	320	360	400
Standard range (CMM)	70~90	110~130	140~180	180~240	220~280	280~360	320~400	360~400
Static pressure (mmAq)	100
DX Coil (kcal/hr)	27,000	40,500	54,000	67,500	81,000	108,000	135,000	162,000
Heating coil (kcal/hr)	52,000	77,000	100,000	120,000	160,000	230,000	280,000	310,000
Coil cross-sectional area (㎡)	0.84	1.3	1.5	1.63	1.83	2.25	2.76	3.32
Supply Air Foil Fan NO.	DS#2½	DS#3½	DS#4½	DS#5½	DS#5	DS#5	DS#5½	DS#6
Supply motor (HP)	5	7.5	10	15	18.5	18.5	22	22
Exhaust Sirocco Fan NO.	DS#2½	DS#3½	DS#4½	DS#5½	DS#5	DS#5	DS#5½	DS#6
Exhaust motor (HP)	2	3	5	7.5	10	10	15	20
filter	AFI 85% or higher
Refrigerant control	Expansion Valve
Temperature control	electronic thermostat
safety device	Compressor protection thermometer, overcurrent relay, high-pressure switch, fusible power supply, etc.
Types of refrigerants	R-22
Refrigerant fill weight (kg)	20	30	40	50	60	80	90	100

MODEL	W1 (mm)	W2 (mm)	H1 (mm)	H2 (mm)	D (mm)
NDAS-1000D	1500	800	2200	1950	1000
NDAS-1500D	1500	800	2200	1950	1500
NDAS-2000D	1500	800	2200	1950	2000

division	NDAS-1000D	NDAS-1500D	NDAS-2000D
Filter efficiency	0.3μm DOP 99.97% or higher
filter	Pre Filter: Non Woven Fabric Filter / Main Filter: HEPA
Jet Nozzle · Wind Speed	25 m/s or more
Jet Nozzle · Quantity	14 EA	28 EA	28 EA
Air volume	17 CMM	34 CMM	34 CMM
Casing material	Oven Baked Melamine Coated Finish
Door material	Steel
Nozzle material	Stainless Steel
Driving style	Adjustable Timer (0~30 sec) and Mechanical Interlock
Door size	800 mm
Door type	Manual
FL. Lamp	20W × 1EA	40W × 1EA	20W × 2EA
weight	About 400 kg	Approximately 520 kg	Approximately 590 kg
Power Supply	3Ø × 220V/380V × 60Hz
note	The casing material can also be stainless steel.

division	Standard type	Sterilization lamp attached type
Casing	Steel · Oven Baked Melamine Coated Finish
Internal material	STS 304
창	Safety Glass (Colorless Transparent Glass) 5t
Interlock	Mechanical
Power Supply	—	1Ø × 220V (15W)
note	Attaching an intercom is optional.	The sterilization light turns off when you open the door.

division	MGHF-3305	MGHF-3610	MGHF-6610	MGHF-6760	MGHF-6915	MGHF-61220
Casing	SCP (Small Paint) & STS304
Punching Plate	SCP (Small Paint) & STS304
Filter efficiency	0.3μm DOP 99.9% or higher
Air volume	4 CMM	8 CMM	17 CMM	20 CMM	25 CMM	32 CMM
lagging	Artilon 25T Internal Insulation

division	NDBFU-6610	NDBFU-61220
Casing	SCP (Small Paint) & STS304
Punching Plate	SCP (Small Paint) & STS304
Filter efficiency	0.3μm DOP 99.9% or higher
Air volume	17 CMM	32 CMM
lagging	Artilon 25T Internal Insulation
Power Supply	3Ø × 220/380V × 60Hz

division	A	B	C	D	E
Media	Glass Fiber
Frame	Aluminum	Aluminum	Ply-wood	Ply-wood	STS
Separator	Aluminum	Kraftpaper	Aluminum	Kraftpaper	Aluminum
Sealant	Poly-Urethane Resin
Gasket	Neoprens Sponge
Max. Temperature (°C)	120	80	120	80	120
Max. Temperature (%)	100	85	100	85	100

MODEL	W1 (mm)	W2 (mm)	H1 (mm)	H2 (mm)	D (mm)
NDPB-1	510	305	400	500	400
NDPB-2	610	405	500	600	500
NDPB-3	710	505	600	700	600

MODEL	W1 (mm)	W2 (mm)	H1 (mm)	H2 (mm)	D (mm)
NDHF-3305	375	375	450	445	445
NDHF-3610	375	680	450	750	445
NDHF-6610	680	680	550	750	750
NDHF-6760	680	830	550	750	902
NDHF-6915	680	990	600	750	1360
NDHF-6122	680	1320	600	750	1360

MODEL	External dimensions (mm)	Air flow (m³/min)	Efficiency (%)	Initial pressure loss (mmAq)
NDHE-661	610 × 610 × 150	17	Over 99.97	Less than 25
NDHE-671	610 × 762 × 150	21	Over 99.97	Less than 25
NDHE-691	610 × 915 × 150	26	Over 99.97	Less than 25
NDHE-6121	610 × 1220 × 150	35	Over 99.97	Less than 25
NDHE-662	610 × 610 × 292	32	Over 99.97	Less than 25
NDHE-672	610 × 762 × 292	40	Over 99.97	Less than 25
NDHE-692	610 × 915 × 292	48	Over 99.97	Less than 25

division	A / B
DY Media	Glass Fiber
Frame	Galvanized steel
Separate	Aluminum
Sealant	Poly-Urethane or Glass Fiber Mat.
Gasket	Neoprens Sponge
Header Location	Two Header Up Standard

MODEL	External dimensions (mm)	Rated airflow (m³/min)	Initial pressure loss (mmAq)	Final pressure loss (mmAq)
NDMV.9-552	594 × 594 × 292	56	17	30
NDMV.9-522	594 × 289 × 292	28	17	30
NDMV.9-551	594 × 594 × 150	28	11	25
NDMV.9-521	594 × 289 × 150	14	11	25
NDMV.8-552	594 × 594 × 292	56	15	30
NDMV.8-522	594 × 289 × 292	28	15	30
NDMV.8-551	594 × 594 × 150	28	8	25
NDMV.8-521	594 × 289 × 150	14	8	25
NDMV.6-552	594 × 594 × 292	56	13	30
NDMV.6-522	594 × 289 × 292	28	13	30
NDMV.6-551	594 × 594 × 150	28	6	25
NDMV.6-521	594 × 289 × 150	14	6	25

Rear duct rear

Rear duct front

7.5RT Rear Duct Side

7.5RT Rear Duct Front

3RT Ducted Front

20RT DUCT type side

20RT DUCT type front

20RT Ducted Front (OA Duct Attached)

20RT Ducted Front

10RT rear duct type rear

10RT Rear-ducted front

10RT Ducted Front

Bottom-up

7.5RT Side

7.5RT Front

5RT Side

5RT Front

3RT Side

3RT Front 1

20RT Front

20RT upward type

20RT Upward-facing Side

10RT Side

10RT Front

Non-standard molded filter box

Non-standard molded side

Non-standard molded front

Non-standard molded indoor unit

Bunker nozzle type 10RT side

Bunker nozzle type 10RT front

Cold water upward type

Cold water type 3RT side

Cold water type 3RT front

Cold water type 30RT side

Cold water type 30RT front

3RT Precision Thermostat (Water-cooled 1)

3RT Precision Thermostat (Water-cooled 2)

20RT DOWN type front

20RT chilled water rear duct type

15RT DOWN type front

Rear duct rear

Rear duct front

7.5RT Rear Duct Side

7.5RT Rear Duct Front

3RT Ducted Front

20RT DUCT type side

20RT DUCT type front

20RT Ducted Front (OA Duct Attached)

20RT Ducted Front

10RT rear duct type rear

10RT Rear-ducted front

10RT Ducted Front

10RT ACU Rear Duct Type Filter Box

10RT ACU Rear-ducted Front

Inha University Department of Chemistry Dehumidifier

Yangpyeong Nenia Logistics Center Dehumidifier

Bodytechmed field dehumidifier

Pyeongtaek site air conditioner

Pyeongtaek Seongmun Electronics HVAC Installation

Jincheon site air conditioner

Air conditioners for export to Indonesia

Eumseong World Q-Tech air conditioner

Eumseong World Q-Tech air conditioner delivery

Eumseong Mimi Foods Air Conditioner

Ansan Site Air Conditioner Coil Part Delivery Site

Delivery of air conditioner coil parts to the Ansan site

Air conditioners for export to the U.S.

Daejeon site air conditioner

삼성전자, 3나노미터 칩 양산 시작

AI 스타트업 붐, 글로벌 투자 증가

Rear duct rear

Rear duct front

7.5RT Rear Duct Side

7.5RT Rear Duct Front

3RT Ducted Front

20RT DUCT type side

20RT DUCT type front

20RT Ducted Front (OA Duct Attached)

20RT Ducted Front

10RT rear duct type rear